Crematogaster captiosa Forel, 1911

Heike Feldhaar, Ulrich Maschwitz & Brigitte Fiala, 2016, Taxonomic Revision of the Obligate Plant-Ants of the Genus Crematogaster Lund (Hymenoptera: Formicidae: Myrmicinae), Associated with Macaranga Thouars (Euphorbiaceae) on Borneo and the Malay Peninsula, Sociobiology 63 (1), pp. 651-681 : 668-669

Crematogaster captiosa Forel, 1911

= Crematogaster borneensis var. harpyia Forel, 1911

= Crematogaster borneensis var. insulsa Forel, 1911

= Crematogaster borneensis subsp. symbia Forel, 1911

= Crematogaster borneensis subsp. novem Forel, 1911

Type material examined

Crematogaster captiosa Forel. Holotype, 1 worker Sarawak (Borneo), Malaysia (Haviland) (MHNG). [In addition 1 queen; however in the original description of Forel (1911) only 1 worker is mentioned but no queen; collection data given on the same label.]

Crematogaster borneensis var. harpyia Forel, 1911 . Syntypes, 1 queen, 1 worker; Sarawak, Borneo (Haviland; from unspecified Macaranga ) (MHNG); 1 alate queen, 1 worker, Borneo (Haviland; from unspecified Macaranga ) (ZMBH)

Crematogaster borneensis var. insulsa Forel, 1911 . Syntypes, 1 alate queen, 1 worker, Borneo (Hose) (MHNG); 1 worker, Borneo (Hose) (ZMBH).

Crematogaster borneensis subsp. symbia Forel, 1911. Syntypes, 1 queen, 1 worker, Sarawak, Borneo (Haviland; from unspecified Macaranga ) (MHNG); 1 worker, Sarawak, Borneo (Haviland) (ZMBH).

Crematogaster borneensis subsp. novem Forel, 1911. Syntypes, 1 worker, 2 alate queens, Sarawak, Borneo (Haviland; from unspecified Macaranga ) (MHNG).

Holotype worker

CI 0.97, DPPW 0.19, DPW 0.2, EL 0.1-0.15, HL 0.61, HW 0.6, LHT 0.4, LPS 0.095, MTW 0.35, PI 1.07, REL 0.18, RLEG 0.59, SI 0.55, SL 0.33, (TL 2.5), WL 0.68

Additional material examined

Peninsula Malaysia: Belum (B. Fiala), Fraser’s Hill (B. Fiala), Gombak (H. Feldhaar, U. Maschwitz), Kuantan (U. Maschwitz), Pulau Lingga (R. Kern), Pulau Bintang (R. Kern), Sabah (Borneo): Crocker Range (B. Fiala)., Danum Valley (H. Feldhaar, B. Fiala), Deramakot (B. Fiala), Poring Hot Spring (H. Feldhaar, A. Meenken), Sarawak (Borneo): Bau (B. Fiala), near Lambir Hills National Park (B. Fiala), Sibu (B. Fiala)

Worker measurements (n=16)

CI 0.92-0.98, DPPW 0.15-0.22, DPW 0.16-0.23, EL 0.1- 0.15, HL 0.53-0.73, HW 0.51-0.7, LHT 0.36-0.57, LPS 0.05- 1.08, MTW 0.3-0.45, PI 1.02-1.13, REL 0.17-0.21, RLEG 0.61- 0.69, SI 0.57-0.62, SL 0.31-0.45, (TL 2.3-3.3), WL 0.57-0.82 Description of worker

Colour light to reddish brown (large workers) with head and gaster being a slightly darker shade than the alitrunk. Workers monomorphic in size. Total body length of workers 2.3 to 3.3 mm. Head and gaster shiny with smooth surface, alitrunk slightly less shiny and faintly shagreened. All body parts bear appressed pubescent hairs. Long flexuous setae present on head, gaster and abdomen: on head especially in frons on gaster more on the posterior margins of tergites and sternites. Only few setae on alitrunk and one pair each on petiole and postpetiole.

Head subquadratic but slightly elongated, always being longer than wide (CI<0.98) and only slightly convex on sides. Anterior clypeal margin slightly convex and with a row of long erect setae projecting anteriorly. Occipital margin slightly concavely rounded, occipital lobes rounded. Mandibles relatively short and with four denticles, capable of closing tightly against the clypeus. Denticles increasing continuously in size from posterior (close to clypeus) to anterior. Surface of mandibles smooth, covered with short pubescent hairs.

Antennae relatively short in comparison to head width (SI 0.55-0.62; mean 0.61) and covered in short pubescent hair. Terminal three funicular segments form a club.

Compound eyes elliptically shaped and not protruding

over margin of head in full-face view.

Pronotum and mesonotum form a convex dome in profile. Anterodorsal surface of pronotum sloping downwards as steep as posterodorsal surface of mesonotum. Metanotal groove slightly notched and clearly developed, whereas the promesonotal suture visible but not prominent.

Propodeal spines in lateral view usually strong and acute. Tip of the spines always protruding over posterior margin of the propodeal spiracle. Dorsal face of the propodeum confluent with the horizontal spines or spines bent slightly upwards. Slope of the posterior face of the propodeum similar to posterior slope of mesonotum and approximately 45° or slightly less steep (Fig S1.4C and S1.4D).

In dorsal view petiole always wider than postpetiole (PI: 1.02-1.13). Node of petiole in dorsal view longer than wide and considerably rounded, dorsal surface flat. In profile the anterior face of the petiolar node flattened and sloping downwards anteriorly and petiole longer than postpetiole. Dorsal surface of the postpetiolar node in profile rounded, lateral nodes visible. Subpetiolar process usually absent. (See Table 1 for comparative overview of worker characters.)

Queen measurements (n=32)

CI 0.90-1.02, DPPW 0.44-0.58, DPW 0.41-0.55, EL 0.55-0.65, HL 1.23-1.47, HW 1.21-1.47, LHT 0.82-1.18, MTW 0.86-1.21, OD1 0.11-0.21, OD2 0.03-0.08, OW 0.16- 0.22, PI 0.92-1.10, REL 0.38-0.48, RLEG 0.42-0.49, ROD 0.1-0.17, ROD2 0.024-0.061, SI 0.52-0.59, SL 0.66-0.81, (TL 6.9-8.0), WL 2.17-2.68

Description of queen

Queens are large, 6.9 to 8.0 mm in total body length and uniformly light to medium brown in colour. Surface of head and gaster smooth and shiny, alitrunk slightly less shiny and faintly shagreened. All body parts bear appressed pubescent hairs. Long flexuous setae present on head gaster and abdomen: on head especially in frons, on gaster more on the posterior margins of tergites and sternites. A row of long erect setae pointing anterior are present on the clypeus. Mandibles relatively short, capable of closing tightly against the clypeus.

Head subquadratic, always slightly longer than wide (CI: 0.90-1.02; mean 0.96). Sides of the head straight and head behind compound eyes as wide as in front of compound eyes. Occipital margin of the head slightly concave. Occipital lobes strongly rounded. Anterior clypeal margin slightly convex. Terminal four segments of funiculus continuously increasing in size forming an indistinct antennal club. Antennal scrobes strongly developed, with an acute and marked dorsal margin; the frontal carinae short.

Compound eyes oval-shaped from lateral view and convex from dorsal view, with the margin of the compound eyes protruding from the sides of the head (see Fig 3.3; Fig S1.4A and S1.4B). Compound eyes large relative to head length spanning more than one third of HL (REL 0.38-0.48). Maximum diameter of compound eyes usually from 0.55 to 0.65 mm (mean EL: 0.6 mm). Maximum width of head including compound eyes usually at least 10% wider than HW (mean 13%). Ocelli relatively large in diameter. Diameter of median ocellus (OW) always larger than distance between lateral ocelli (OD1).

Mesoscutum convexly rounded anterodorsally. Mesoscutellum nearly in horizontal plane in lateral view. Propodeum flattened dorsally and then drops off at an angle of approximately 45° posterior of the propodeal spiracle. Mesoscutum long, stretching out over approximately half of the alitrunk in lateral view. In dorsal view, the posterior margin of the propodeum forms a straight line and the mesonotum broadly triangular. Propodeum not armed with spines.

Node of petiole and postpetiole in dorsal view rounded and approximately the same width (mean PI: 0.98), but variable (PI range: 0.93-1.10). In lateral view the petiole anterodorsally flattened and sloping downwards and slightly longer than the postpetiole. Postpetiole round in dorsal and lateral view without distinct nodes. (See Table 1 for comparative overview of queen characters.)

Distribution and biology