Stegocephalus carolus, Wang & Sha & Ren, 2024

Wang, Yanrong, Sha, Zhongli & Ren, Xianqiu, 2024, One new species of Stegocephalus Kroyer, 1842 (Amphipoda, Stegocephalidae) described from a seamount of the Caroline Plate, NW Pacific, ZooKeys 1195, pp. 121-130 : 121

Stegocephalus carolus sp. nov.

Figs 2 , 3 , 4

Material examined.

Holotype. MBM 286610, ♀ (8.9 mm, with 6 big yolks), dissected, unnamed seamount on Caroline Plate, NW Pacific, M5173, 10°03′N, 140°10′E, depth 1221 m, 30 May 2019. Paratypes: MBM 287879, 2♂ (6.0 and 7.0 mm), not dissected, unnamed seamount on Caroline Plate, NW Pacific, M5117, 10°04′N, 140°12′E, depth 870-944 m, 28 May 2019; MBM 287878, 2♂ (7.6 and 3.4 mm), not dissected, unnamed seamount on Caroline Plate, NW Pacific, M5362, 10°04′N, 140°11′E, depth 813-1182 m, 2 June 2019.

Description.

First pereon segment longer than the rest; pleonite 1-3 dorsally smooth; epimeral plate 1 with posteroventral corner broadly rounded; epimeral plate 2 with posteroventral corner subacute; epimeral plate 3 without minute serration at posteroventral corner, posteroventral corner strongly produced, triangular. Head partially covered by pereonite 1 and coxa 1; much deeper than long. Rostrum absent. Eyes not apparent in ethanol-fixed material. Antenna 1 with callynophore well developed; peduncle about twice as long as first primary flagellar article; article 1 slightly longer than articles 1-2 combined; primary flagellum 7-articulate, article 1 longest; accessory flagellum 1-articulate, beyond article 1 of primary flagellum, bearing long setae apically. Antenna 2 slightly longer than antenna 1, peduncle (articles 3-5) slightly shorter than flagellum, article 4 longer than article 5, not setose; flagellum 12 articles, article 1 longer than rest of articles.

Mouthparts. Epistomal plate absent. Upper lip broader than long, bilobate, slightly asymmetrical. Lower lip with the narrow lobes bearing row of simple setae. Right Mandible incisor with 9 teeth; incisor of left mandible with 7 teeth, left lacinia mobilis with 9 teeth. Maxilla 1 palp 2-articulate, rectangular, apex not reaching above the apex of outer plate, apically bearing 4 plumose setae; outer plate with 9 setal-teeth arranged in a pseudocrown; inner plate with a well-developed shoulder, setae pappose. Maxilla 2 gaping and geniculate; outer plate with about 10 apical setae bearing distal hooks; inner plate with marginal and submarginal setae pappose. Maxilliped with inner plate subrectangular, not exceeding base of palp article 2, distal margin slightly concave, setose, medial setae-row present; outer plate only with inner margin bearing about 7 small robust setae; palp 4-articulate, article 2 distinctly shorter than article 1, inner margin produced distally, dactylus short, about 1/5 length of article 3.

Gills present on coxae 2-7. Oostegites present on 2-5.

Pereopods. Gnathopod 1 simple; coxa triangular, tapering, anterior margin convex; basis with anterior margin sinuous, both margins heavily setose; ischium not elongate, posterior margin bearing long setae, anterior margin with several short robust setae; carpus subequal in length to propodus, expanded distally, anterior margin bearing group of long setae distally, posterior margin setose; propodus tapering anterior margin bearing row of 6 robust setae about 2/3 length of propodus and two short robust setae subdistally, posterior surface rows of pectinate setae and rows of plumose setae; dactylus nearly straight, tapering, about 1/3 length of propodus. Gnathopod 2 simple; coxa much longer than broad, subrectangular, ventral margin slightly curved; basis much more slender than gnathopod 1, both margins setose; ischium slightly shorter than merus, subrectangular; carpus slender, not expanded distally, shorter than propodus, distal and posterior margin setose; propodus slender, setae on posterior surface similar to that of gnathopod 1; dactylus tapering, curved. Pereopod 3 coxa similar to that of gnathopod 2; basis linear, anterior margin bearing dense short robust setae, posterior margin bearing several long setae; ischium short; merus longer than carpus, anterodistally drawn out, with one long robust seta, posterior margin bearing several setae; carpus subequal in length to propodus, posterior margin with few setae; propodus with only posterior margin bearing few small setae; dactylus tapering, slightly curved. Pereopod 4 similar to pereopod 3, but coxa large, posteroventral lobe broadly rounded, posterior margin excavate. Pereopod 5 slightly longer than pereopod 4; coxa bilobate, posterior lobe deeper; basis linear, both margins setose; merus to dactylus of similar appearance to pereopod 4, but merus subequal in length to carpus, and propodus much slender, distinctly longer than carpus. Pereopod 6 longer than pereopod 5; coxa unilobate; basis expanded posteriorly, rounded below, anterior margin and anterior dorsal surface with several robust setae, posterior margin serrated with small setae; distal 5 articles of similar appearance to pereopod 5. Pereopod 7 shorter than pereopod 6, but longer than pereopod 5; basis expanded posteriorly, distinctly larger than that of pereopod 6, posterior margin serrated with small setae, beyond end of ischium; merus longer than carpus, margins setose; carpus shorter than propodus, anterior margin with three groups setae; propodus shorter than that of pereopod 6, anterior margin with small setae; dactylus slightly curved, tapering.

Uropods and telson. Uropod 1 peduncle 1.4 times longer than rami, outer margin densely setose, inner margin with only 2 robust setae; rami lanceolate, subequal in length, both rami with inner and outer margins setose. Uropod 2 shorter than uropod 1, peduncle subequal in length to rami, both margins setose; rami subequal in length, both rami with inner and outer margins setose. Uropod 3 shortest, peduncle distinctly shorter than rami, not setose; outer ramus 1-articulate, shorter than inner ramus, both rami with inner and outer margins setose. Telson longer than broad, without setae, cleft about 0.8 of total length, distally acute.

Etymology.

The new species is named after its type locality, the Caroline Plate.

Distribution.

Presently known only from a seamount of the Caroline Plate, at a depth of 813-1221 m.

Remarks.

According to the revision of the family Stegocephalidae Dana, 1852 by Berge and Vader (2001), Stegocephalus carolus sp. nov. belongs to the subfamily Stegocephalinae Dana, 1852. The new species shares distinctive characteristics with other species in the genus Stegocephalus Krøyer, 1842, including a two-articulate palp of maxilla 1, a produced palp article 2 of the maxilliped, a conspicuously expanded basis of pereopod 6, a 1-articulate outer ramus of uropod 3, and a cleft telson. Two Stegocephalus species, S. cascadiensis (Moore, 1992) and S. longicornis (Gurjanova, 1962), have been previously reported in the North Pacific ( Moore 1992; Berge and Vader 2001).

Stegocephalus cascadiensis (Moore, 1992) was originally reported from the Cascadia Abyssal Plain at a depth of 2740-2818 m ( Moore 1992). Stegocephalus carolus sp. nov. differs from S. cascadiensis by the peduncle of antenna 1 longer than the first flagellar article, and the accessory flagellum extending beyond the distal margin of the first flagellar article. Additionally, the apical setae on the outer plate of maxilla 2 are hooked in the new species, whereas, they are unhooked in S. cascadiensis . In S. carolus sp. nov., the first palp article of the maxilliped is subequal in length to the second article, whereas in S. cascadiensis , the first palp article is much longer than the second. The inner plate of the maxilliped is subrectangular with a concave distal margin in S. carolus sp. nov., whereas it is subtriangular in S. cascadiensis . The second palp article of the maxilliped in S. carolus sp. nov. has a produced inner margin, and the posterior margin of pereopod 7 is slightly serrate instead of smooth. Furthermore, the rami of uropod 2 are subequal in S. carolus sp. nov., whereas the inner ramus is longer than the outer ramus in S. cascadiensis . Lastly, the outer ramus of uropod 3 in S. carolus sp. nov. is shorter than the inner ramus, while in S. cascadiensis , it is longer than the inner ramus ( Moore 1992, fig. 7).

Stegocephalus longicornis (Gurjanova, 1962) was originally reported from the Bering Sea at a depth of over 2440 m. The new species differs from S. longicornis by: the shorter antenna 1, the 7-articulated primary flagellum and the 1-articulated accessory flagellum, while the primary flagellum is 11-articulate and the accessory flagellum is 3-articulate in S. longicornis ; the distal margin of the inner plate of the maxilliped is concave rather than convex, and the inner margin of palp article 2 is produced, versus not produced in S. longicornis ; and the posteroventral corner of epimeral plate 3 is strongly produced and triangular, while epimeral plate 3 is only produced in a small triangular angle in S. longicornis ( Gurjanova 1962, fig. 130).

The remaining species of Stegocephalus are found in the Arctic, North Atlantic, or the Southern Ocean ( Berge and Vader 2001). Stegocephalus carolus sp. nov. can be easily distinguished from S. abyssicola (Oldevig, 1959) by its strongly projected posteroventral corner of the third epimeral plate ( Oldevig 1959). It is also different from S. ampulla (Phipps, 1774), S. inflatus Krøyer, 1842, S. rostrata KH Barnard, 1932, and S. similis Sars, 1891 by the absence of a rostrum ( Barnard 1932; Steele 1967; Berge and Vader 2001). Especially, it differs from S. inflatus by the pale of maxillae 1 being 2-articulated, while it is 1-articulated in S. inflatus ( Steele 1967, fig. 1B); epimeral plates 2 and 3 have the posteroventral corner broadly rounded, while epimeral plates 2 and 3 are produced into a sharp tooth in S. inflatus ( Steele 1967, fig. 1A). Additionally, the new species can be distinguished from S. kergueleni (Schellenberg, 1926) and S. nipoma (J.L. Barnard, 1961) by the presence of a toothed left lacinia mobilis, the posterior margin of gnathopod 1 is not densely setose; and the subacute posteroventral of epimeral 2 is not broadly rounded ( Schellenberg 1926; Barnard 1961). Lastly, it also differs from S. similis by the shape of the third epimeral plate, which is neither serrated nor notched ( Oldevig 1959).

Figures

Figure 2. Stegocephalus carolus sp. nov., MBM 286610, holotype, ♀ (8.9 mm): G 1 R, right gnathopod 1; G 2 R, right gnathopod 2.

Figure 3. Stegocephalus carolus sp. nov., MBM 286610, holotype, ♀ (8.9 mm): H, head; A 1, antenna 1; A 2, antenna 2; UL, upper lip; LL, lower lip; Md L, left mandible; Md R, right mandible; Mx 1, maxilla 1; Mx 2, maxilla 2; Mxp, maxilliped.

Figure 4. Stegocephalus carolus sp. nov., MBM 286610, holotype, ♀ (8.9 mm): P 3 R, right pereopod 3; P 4 R, right pereopod 4; P 5 R, right pereopod 5; P 6 R, right pereopod 6; P 7 R, right pereopod 7; U 1 R, right uropod 1; U 2 L, left uropod 2; U 3 L, left uropod 3; T, telson.