Apostolepis ambiniger (Peters, 1869)

Entiauspe-Neto, Omar M., Koch, Claudia, Harvey, Michael B., Colli, Guarino R. & Guedes, Thais B., 2021, Redescription of Apostolepis ambiniger (Peters, 1869) (Serpentes: Dipsadidae: Elapomorphini), Vertebrate Zoology 71, pp. 231-251 : 231

Apostolepis ambiniger (Peters, 1869)

Figs 1 , 2 , 3 , 4 , 5

Rhynchonyx ambiniger Peters, 1869:438. Holotype male ( ZMB 6450; Figs 1 - 2 ) from " angeblich aus Paraguay (= allegedly from Paraguay)." Acquired from " S. Braconnier," likely a private collector from South America [Examined]. Peters and Orejas-Miranda 1970:22; Peters and Orejas-Miranda 1972:588; Harvey 1999:389; Lema et al. 2005:21; Nogueira et al. 2019:29.

Apostolepis ambinigra (Peters, 1869): Boulenger 1896:237; Koslowsky 1898:30; Amaral 1929:40; Hartweg 1932:103; Peters and Orejas-Miranda 1970:22, 1972:588.

Apostolepis dimidiata (Jan, 1862): Peracca 1895:195 [in part, misidentification].

Apostolepis dorbignyi (Schlegel, 1837): Boulenger 1894:347 [in part, misidentification].

Apostolepis vittata (Cope, 1887): Boulenger 1896:56 [in part, misidentification].

Apostolepis tenuis Ruthven, 1927: Amaral 1929:51 [in part, misidentification].

Diagnosis.

A species of Apostolepis with the following characters: (1) 15/15/15 dorsal scales; (2) preocular present, contacting nasal; (3) loreal absent; (4) temporals 1+0 or absent; (5) supralabials six, 2nd-3rd entering orbit; (6) infralabials 6-7, 1st-4th in contact with first pair of chinshields; (7) ventrals 219-244 (219-244 in males, 230-242 in females); (8) subcaudals 21-33 (28-33 in males, 21-26 in females), cloacal plate divided; (9) dorsal ground coloration uniformly red or orange with black markings; (10) ventral pattern uniformly yellow or red; (11) first 3-6 vertebrals black, nuchal collars and dorsal stripes absent; (12) distal black caudal blotch overlapping last 9-15 vertebrals and 7-11 subcaudals; (13) terminal scale white or bicolored black dorsally, white ventrally; (14) supralabial blotch large or small, up to four supralabial scales wide; (15) white blotch on rostral vestigial or absent; (16) SVL 390-600 mm, tail length 33-60 mm, tail is 8-10% of total length and SVL is 90-92% of total length.

Comparisons.

Apostolepis ambiniger occurs near to A. dimidiata (characters in parentheses), another red species of Apostolepis that inhabits the Cerrado and Gran Chaco. Apostolepis ambiniger can be distinguished from A. dimidiata by its uniformly red dorsal pattern (two lateral black stripes over a red background), 3-6 black dorsal rows in the nuchal area (up to 3 rows), a white or bicolored terminal scale (bicolored or black), rostral white blotch absent or vestigial (present, small, reaching nasal), and slightly bilobed hemipenis, with expanded lips and a distinct sulcus spermaticus (unilobed, inconspicuous sulcus spermaticus).

From Apostolepis goiasensis Prado, 1942, A. ambiniger can be distinguished by its uniformly colored dorsum (three black dorsal stripes), 3-6 black dorsal rows in the nuchal area (0-3 scales), rostral blotch absent or vestigial (large, white, reaching prefrontals), fourth supralabial separated from parietal (in contact), larger size (up to 600 mm in A. ambiniger compared to a maximum known SVL = 392 mm), and a calyculate hemipenial apex (spinulate apex).

Several relatively rare congeners may occur in sympatry with A. ambiniger in some parts of its range but are unlikely to be confused with it. Unlike A. breviceps Harvey, Gonzales and Scrocchi, 2001, A. ambiniger has six supralabials with the second and third entering the orbit (five supralabials, third only entering orbit), two pairs of chinshields (one pair), and infralabials 1-4 contacting the first chinshield (1-3). Its uniformly red dorsum makes A. ambiniger readily distinguished from A. lineata (striped), as well as its 1-4 infralabials contacting the first chinshield (1-3). Additionally, unlike A. intermedia Koslowsky, 1898, female A. ambiniger have 21-26 subcaudals (28-31) and unlike both A. vittata (Cope, 1887) and A. christineae Lema, 2002, male A. ambiniger have 28-33 subcaudals (24-28).

Various extralimital or non-sympatric species, such as Apostolepis adhara França, Barbo, Silva-Jr, Silva and Zaher, 2008, A. albicollaris Lema, 2002, A. arenaria Rodrigues, 1993, A. assimilis (Reinhardt, 1861), A. borelli Peracca, 1904, A. cearensis Gomes, 1915, A. cerradoensis Lema, 2003, A. dorbignyi (Schlegel, 1837) , A. flavotorquata ( Duméril, Bibrón and Duméril, 1854), A. gaboi Rodrigues, 1993, A. kikoi Santos, Entiauspe-Neto, Araújo, Souza, Lema, Strüssmann and Albuquerque, 2018, A. multicincta Harvey, 1999, A. nelsonjorgei Lema and Renner, 2004, A. phillipsi Harvey, 1999, A. quirogai Giraudo and Scrocchi, 1998, A. sanctaeritae Werner, 1924, A. tenuis Ruthven, 1927, and A. thalesdelemai Borges-Nojosa, Lima, Bezerra and James, 2016 have both white or black nuchal collars present, whereas A. ambiniger lacks any trace of white nuchal pigment and lacks collars. Furthermore A. longicaudata Gomes in Amaral, 1921, A. niceforoi Amaral, 1935, A. nigrolineata (Peters, 1869), A. pymi Boulenger, 1903, A. serrana Lema and Renner, 2006, and A. striata Lema, 2004, have longitudinal dorsal stripes whereas A. ambiniger has a uniformly-colored dorsum.

Osteological comparisons.

Among congeners, the skull has only been described for three species: A. assimilis , A. cearensis , and A. sanctaeritae . The skull of Apostolepis ambiniger differs from congeners by having edentulous pterygoids (pterygoid teeth 2-4) and only 5-6 dentary teeth (dentary teeth 7-8 in A. assimilis [n = 12] and in A. cearensis and 8-10 in A. sanctaeritae [n = 5]) and by exhibiting a rectangular-shaped fronto-parietal suture in dorsal view (U-shaped in A. assimilis and A. sanctaeritae and W-shaped with an antero-median parietal indentation in A. cearensis ).

It can be further distinguished from A. assimilis and A. sanctaeritae by having 4 palatine teeth (5); a strongly enlarged premaxilla with a very broad ascending process, which covers the lateral processes in dorsal view (premaxilla and ascending process less strongly developed and lateral processes visible in dorsal view in A. assimilis and premaxilla and ascending process less strongly developed in A. sanctaeritae ); nasal and prefrontal dorsally in contact (separated from each other); maxillae with an edentulous and pointed anterior process (anterior part of maxillae blunt and toothed); ectopterygoid partly covered by parietal (not covered by any other bone and therefore completely visible in dorsal view); pterygoids almost entirely covered by roofing skull bones in dorsal view, except for posterior tips (anterolateral region of pterygoids visible and not covered by parietal in dorsal view in A. assimilis and lateral edges of pterygoid visible and not covered by parietal in dorsal view in A. sanctaeritae ); parietal ridges about parallel to each other, almost reaching to a point where parietal forms a right-angled suture with prootic vs parietal ridges approach each other and almost reach to suture with supraoccipital in A. assimilis and ridges merge in the posterior fifth of parietal and reach to suture with supraoccipital in A. sanctaeritae ; rectangular frontals in dorsal view (slightly circular [both together] in A. assimilis and irregular shaped and not rectangular in A. sanctaeritae ); slender palatines with a straight medial edge (less slender and with medial edge slightly curved in A. assimilis and robust in A. sanctaeritae ); parasphenoid rostrum anteriorly surpassing anterior border of frontals and in contact with ventral surface of posteromedial region of nasals (parasphenoid rostrum not surpassing frontals and not contacting nasals); absence of symmetrical bulges medially and backwards pointing projection on each side of the outer lateral edges on the basioccipital (presence of short, blunt, and backwards pointing projection in A. assimilis and presence of symmetrical bulges and backwards pointing projection in A. sanctaeritae ); slender dentaries and pterygoids (both distinctly broader); similarly high prearticular and surangular crests (prearticular crest is slightly higher than surangular crest).

It further differs from A. assimilis by having an unfused parabasisphenoid and basioccipital (fused); anterior end of supratemporal overlapping posterior half of prootic and posterior end not reaching posterior end of exoccipital (anterior end of supratemporal only overlaps posterior part of prootic and posterior end protrudes posteriorly beyond posterior end of exoccipital and is thus the most posteriorly protruding bone of the skull roof); a short retroarticular process of the compound bone (longer); vomerine processes of premaxilla robust and blunt (sharply pointed); exoccipital components of occipital condyle brought together on its dorsal surface (being separated by the basioccipital).

Redescription of holotype.

Adult male. Total length 395 mm; SVL 356 mm; tail length 39 mm (9.8% of total length, 10.9 % of SVL). Head length 10.32 mm (2.61 % of total length, 2.89 % of SVL); head width 4.71 mm (45 % of head length); interorbital distance 2.4 mm (51% of head width); rostro-orbital distance 5 mm; naso-orbital distance 1.5 mm (14% of head length). Cervical constriction slightly distinct; head slightly distinct from neck, triangular in dorsal view, narrow anteriorly, arched in lateral view. Pupil sub-elliptical. Rostral conical, 1.81 mm wide, strongly projected over lower jaw, length of portion visible in dorsal view slightly larger than distance to external anterior edge of frontal. Internasals absent. Prefrontals paired, square, 2.15 mm long, 1.81 mm wide; each prefrontal contacting rostral, nasal, preocular, supraocular, and frontal. Frontal hexagonal, 3.12 mm long, 2.28 mm wide, contacting prefrontal, supraoculars, and parietals. Supraocular trapezoidal, longer than wider, in contact with posterior edges of prefrontal, lateral edges of frontal, superior edge of preocular, superior edge of postocular, and anterior edges of parietals. Parietals paired; right parietal 3.96 mm long, 2.25 mm at its largest width, contacting frontal, supraocular, postocular, fourth through sixth supralabials, anterior temporal, occipital, and interoccipitals. Occipitals square-shaped, enlarged; each occipital contacts a single interoccipital and dorsals. Interoccipitals three, slightly smaller than vertebral and paravertebral rows of dorsals. Nasal triangular, undivided, longer than wide; contacting rostral, prefrontal, first and second supralabials, and preocular. Nostril in anterior third of nasal, slightly visible from above. Preocular pentagonal; postocular pentagonal, contacting third through fifth supralabials, supraocular and parietal. Temporals 1 + 0, contacting sixth supralabial, latero-posterior edge of parietal, dorsals, and a single interoccipital. Six supralabials, 2-3 entering orbit; first contacting nasal, second contacting nasal and preocular, third and fourth contacting postocular, fifth contacting postocular and parietal, sixth contacting parietal; sixth and fifth supralabials largest and equal in length. Mental triangular, as long as wide. Two pairs of chinshields, second pair longer. Seven infralabials, 1-4 in contact with anterior chinshields, 5-7 in contact with posterior chinshields, first pair in contact with each other behind mental; fourth and fifth infralabials largest, equal in size. Dorsals smooth, in 15/15/15 rows. Pre-cloacal scale divided. Ventrals 219; preventrals 5. Subcaudals paired, 34/34. Terminal scale acuminate, curved ventrally.

Head uniformly dark brown dorsally and laterally, dark brown pigmentation covering up to five dorsal rows. Rostral uniformly dark brown on dorsal surface, with diffuse white pigmentation on its ventral surface and anterior edges. Supralabial blotch single and large, covering inferior edges of supralabials 1-5. White and black nuchal collars absent. Diffuse dark brown pigmentation on outer edges of infralabials and chinshields. Dark brown gular collar complete, covering up to four rows of gular scales. Dorsal background coloration light tan (discolored and dehydrated across ventrals 153-164). Dorsal stripes absent. Ventral and subcaudal coloration uniformly light tan. Caudal blotch dark brown, extending proximally 15 vertebrals and seven subcaudals. Terminal scale bicolored, dark brown dorsally, white ventrally.

Coloration in life.

Dorsal head uniformly black, without rostral blotches or nuchal collars; lateral head uniformly black, or with small to vestigial white supralabial blotch covering no more than two scales. Infralabials uniformly black, or with white blotch covering 2-3 scales. Ventral portion of head black, with diffuse white pigmentation on posterior chinshields. Rostral lacking white blotch. Dorsal background coloration red or orange (Figs 4 - 5 ); first 3-6 dorsal scale rows black. Ventral coloration yellow or light red. Distal black caudal blotch overlapping last 9-15 vertebrals and 7-11 subcaudals. Terminal scale white or bicolored black dorsally, white ventrally.

Coloration in preservative.

In preservative, black coloration turns dark brown, red coloration gradually becomes light tan, and yellow ventral coloration becomes uniformly tan (Figs 1 - 3 ).

Hemipenis.

Hemipenis slightly bilobed, noncapitate, semicalyculate (Fig. 6 ). Lobes slightly differentiated, present on distal portion of capitulum; lobes rounded, spinules centrifugally oriented from organ’s medial surface; lobes and capitulum sparsely covered by papillate calyces on sulcate and lateral sides; capitulum conspicuous in both sulcate and asulcate sides, slightly smaller than hemipenial body, and positioned slightly above bifurcation of sulcus spermaticus. Bifurcation of sulcus spermaticus in middle of organ. Capitular groove distinct on both sides of organ. Sulcus spermaticus branching centrolineally, with wide invagination on apex and capitulum; margins of sulcus spermaticus wide, bordered by expanded lips. Hemipenial body moderately long for Apostolepis , subcylindrical; on sulcate surface, hemipenial body covered by moderate to large hooked spines; on asulcate side, hemipenial body with large basal naked pocket, extended to medial and apical regions, with enlarged spines; 2-5 rows of enlarged spines present on lateral portion of sulcate side and medial and apical region of asulcate side.

Sexual dimorphism.

Males of Apostolepis ambiniger have relatively longer tails (F 7,6 = 17.02, P = 0.002), fewer ventrals (t 10,8 = 2.77, P = 0.014), and more subcaudals (t 11,8 = 4.19, P = 0.001) than females (Fig. 7 ). In males, the tail is 8-10% (9 ± 0, n = 7) of total length and SVL is 90-92% (91 ± 0, n = 7) of total length, whereas, in females, the tail is 6-9% (7 ± 0, n = 6) of total length and SVL is 91-94% (93 ± 0, n = 6) of total length. Males have 218-244 (229 ± 8, n = 10) ventrals and 27-34 (30 ± 2, n = 11) subcaudals, whereas females have 230-251 (239 ± 6, n = 8) ventrals and 23-31 (25 ± 3, n = 8) subcaudals.

Snout osteology.

The snout complex is composed of the premaxillae, nasals, septomaxillae, vomers, and prefrontals (Figs 8 - 10 ). The single premaxilla is edentulous, thick and robust, 1.8 times broader than high, with a stout, posterodorsally oriented ascending process, distinctly broader than high and with the lower region of the process defining the widest part of the premaxilla in anterior view, dorsal surface slightly concave, posterodorsally broadly triangular at the articulation with the anterior end of the nasals; the transverse processes are posterolaterally oriented, not visible in dorsal view, long, approaching but still distinctly separated from the maxillae; between the lateral wings of the ascending process and the transversal processes, which protrude laterally about equally far in anterior view, there is a deep narrow notch; the vomerine processes are posteriorly oriented with parallel medial edges, robust, about triangular, blunt, dorsally contacting the anteroventral part of the body of the septomaxilla, largely separated from the anterior end of the vomers; the ventral surface of the premaxilla pierced by about 4 foramina.

The paired nasals are about rectangular in dorsal view, about twice as long as broad, convex, in medial contact along a straight suture, the front edges form a broad V-shaped anterior region, that frames the ascending process of the premaxilla; the lateral edges are curved downwards; posteriorly the nasals share a loose transverse suture with the frontals; posterolaterally is a small contact region with the prefrontals; the posteroventral process of the nasal contacts the anteroventral process of the frontal posteriorly and the anterior tip of the dorsally oriented process of the parasphenoid rostrum ventrally; the vertical lamina of the nasals laterally contacting the medial edge of the septomaxillae.

The paired septomaxillae are about 2.6 times longer than broad, separated from each other by the vertical laminae of the nasals; each with a broad ascending conchal process, freely extending laterally, marginally visible beyond the lateral edge of the nasal in dorsal view, but not reaching the height of the lateral nasal edge; the anteromedial process of the septomaxilla is about one fifth the length of the septomaxilla, curved and anterolaterally oriented, each reaching over about half the depth of the premaxilla and contacting the posterior lamina of the lateral wing of the premaxillary ascending process, the anterior tip of the process is hardly visible in dorsal view; the posteromedial process is long and thin, makes up about 40% the length of the entire septomaxilla, medially contacting the vertical lamina of the nasal, the rounded posterior tip contacting the anteroventral tip of the frontal, directly lateral to the ventral nasal-frontal contact region; the septomaxillary body is a complex structure made of thin bone material with a rounded indentation in its posterior view; the anterior region of the septomaxillary body is medially contacting the dorsal surface of the premaxillary vomerine process; the posterior region of the septomaxillary body and the ventral surface of the anterior two thirds of the posteromedial process of the septomaxilla contact the anterior and anterodorsal region of the vomer.

The paired vomers are complex structures, about 1.3 times longer than broad, approaching, but not contacting each other medially, and with the anterior and posterior region diverging; anteriorly and anterodorsally contacting the septomaxilla, laterally approaching but not contacting the anterior region of the palatine; the body of the vomer is made of thin bone material and globular with an anteriorly oriented opening; the bifurcate vertical posteromedial laminae are diverging dorsally and ventrally, framing but not contacting the choanal process of the palatine anteriorly.

The paired prefrontals are 1.5 times longer than broad, greatly separated from another, oriented slightly oblique, forming the anterior margin of the orbits; the anterolateral margin is undulated; the posterolateral margin is slightly concave; the dorsal edge contacts the anterolateral edge of the frontal along a slightly curved suture; anterodorsally there is a small contact region with the posterolateral edge of the nasal; the ventral edge contacts the dorsal surface of the maxilla and approaches the maxillary process of the palatine, without contacting it; in rear view, a triangular medially directed process is visible at about mid-height of the prefrontal and a large slightly oval lacrimal foramen is visible in the ventromedial region.

Braincase osteology.

The paired frontals are rectangular, about 1.8 times longer than broad, almost similar in size as the nasals, slightly convex, in contact medially with a straight suture, with undulated lateral margins (Fig. 8 ); about one fifth of the lateral margin of each frontal, directly posterior to the region of greatest width of the frontal participates in the formation of the dorsal margin of the orbit; the anterior edge is almost straight, forming a loose transverse suture with the posterior edge of the nasal; the anterolateral edge of the frontal forming an oblique, marginally curved suture with the prefrontals; the posterior edge is straight, contacting the parietal along half of its length; the posterior half of the lateral edge of each frontal contacting the medial edge of the anterolateral process of the parietal, leading to an exclusion of the frontal from the orbit in that region; anteroventrally the frontal contacts the nasal and directly lateral to this contact zone it has a bulge whose anterior surface contacts the posterior end of the posteromedial process of the septomaxilla; laterally each frontal has a ventromedially oriented, concave lamina, the laminae of both frontals contact each other medially along the anterior third of their length; anteromedially, the frontal exhibits a vertical lamina along the first fifth of the bone, which is ventrally fused to the lateral lamina, forming a short tubular structure in the anterior region of each frontal, the vertical lamina of both frontals are in firm medial contact; posterior to the tubular structure, the lateral lamina of both frontals are distinctly separated from each other, with their medial edges being about parallel to each other; on the ventral surface of the contact zone of the vertical lamina of the frontals is a facet, in which the anterior part of the dorsal process of the parabasisphenoid intrudes, posterior to it the dorsal process protrudes into the gap between the two lateral lamina, and contacts them with its lateral edges.

The single parietal is elongate, about 1.5 times longer than broad, has a slightly convex dorsal surface and is almost entirely rectangular, except for the anterolateral processes; the anterolateral processes are moderately long and robust, framing the lateral borders of the frontals and forming the posterior and posterodorsal margin of the orbit; the anterior border is almost straight, but with a medial elongated notch, so that the parietal is not in contact with the frontal bones in this area; the anterolateral processes extend straight anteriorly, run approximately parallel to each other and form a right angle to the anteromedial edge of the parietal, resulting in a rectangular-shaped fronto-parietal suture in dorsal view; in dorsal view, the parietal covers the pterygoids completely; a ridge extends dorsally on both sides from the anterolateral process in posterior direction, almost reaching to a point where the parietal forms a right-angled suture with the prootic, both ridges are about parallel to each other; lateral to the dorsal ridges, the parietal slopes downwards with a slightly convex surface to meet ventrally the posterior half of the parasphenoid rostrum and about the anterior half of the basisphenoid portion of the parabasisphenoid; posterolaterally the parietal contacts the anterior margin of each prootic and forms the anterior limit of the foramen for the maxillary branch of the trigeminal nerve at the lateral suture with the prootic; the posterodorsal region of the parietal forms an almost straight suture with the supraoccipital. Postorbitals are absent.

The single supraoccipital is ovaloid, 1.5 times broader than long, slightly concave, and the anterior region is slightly elevated; anteriorly it contacts the parietal, anterolaterally the prootics, and posteriorly the exoccipitals; it is distinctly separated from the supratemporals; laterally the supraoccipital extends downwards (internal) to contribute to the dorsomedial walls of the otic capsules.

The paired exoccipitals are irregularly shaped, and in medial contact along a straight suture; each has a little pronounced, oblique, dorsolateral ridge, which is parallel to the inner margin of the supratemporals; anterodorsally each exoccipital contacts the supraoccipital with a slightly curved suture, anterolaterally the prootic, ventrally the basioccipital and dorsolaterally the supratemporals; the fenestra ovalis is situated at the suture between the prootic and the exoccipital, and the exoccipital forms the posterior margin of the fenestra; posterior to the fenestra ovalis halfway to the foramen magnum is a recess, bearing tow (left exoccipital) or three (right exoccipital) foramina; posteroventrally, the exoccipital components of the occipital condyle are in close contact, excluding the posterior process of the basioccipital from participation in the foramen magnum; the exoccipital contributes to the formation of the posteroventral, posteromedial and posterolateral wall of the otic capsule; the exoccipital is the most posteriorly protruding bone of the skull roof.

The single basioccipital is almost hexagonal shaped, 1.2 times longer than broad, convex; it contacts the parabasisphenoid complex anteriorly, the prootics anterolaterally, and the exoccipitals posterolaterally; posterodorsally the basioccipital is overlain by the exoccipital components of the occipital condyle, preventing its participation in the formation of the foramen magnum; the posterior end of the basioccipital (part of the occipital condyle), is rectangular-shaped in ventral view and quadrant-shaped in posterior view; the widest part of the basioccipital is at the sutures with the prootics and exoccipitals; the surface of the basioccipital is relatively smooth and the lateral edges are straight, without backwards pointing projections; a small foramen is present medially in the posterior region, at about where the basioccipital part of the occipital condyle begins.

The paired prootics are ovaloid in lateral view, 1.25 times higher than long; each prootic contacts the parietal anteriorly, the supraoccipital dorsally, the exoccipital posteriorly, the parabasisphenoid complex anteroventrally, the basioccipital posteroventrally, and the anterior part of the supratemporal on its dorsal surface; at the suture with the parietal the prootic forms the posterior border of the foramen for the maxillary branch of the trigeminal nerve and at the suture with the exoccipital it forms the anterior margin of the fenestra ovalis; the foramen for the mandibular branch of the trigeminal nerve is posterolaterally oriented and situated slightly posterior and slightly below the central part of the prootic in lateral view; there are three further foramina on the lateral surface of the prootic: a medium-sized foramen is situated in between both trigeminal nerve foramina, a larger foramen in the anteroventral region of the prootic, at the suture with the parabasisphenoid, and a small foramen is placed in between the posterior trigeminal nerve foramen and the contact region of the prootic with the suture of the parabasisphenoid and the basioccipital; in dorsal view, the prootic bears a depression in the posterior region in which the anterior tip of the supratemporal rests; the prootic contributes to the formation of the anteroventral, anteromedial and anterolateral wall of the otic capsule; few small foramina pierce the medial laminae of each exoccipital.

The unpaired parasphenoid and basisphenoid are fused to form the parabasisphenoid, forming an elongate structure, about 2.2 times longer than broad, that occupies most of the skull floor, and is concave in the parasphenoid region and convex in the basisphenoid region; the basisphenoid portion is each roughly rounded, and the parasphenoid rostrum is lanceolate with a pointed anterior tip; the anterior half of the parasphenoid rostrum bears a dorsally oriented process, which protrudes into the gap between the two vertical lamina of the frontals, and contacts them with its lateral edges; the anterior tip of the parasphenoid rostrum surpasses the anterior border of the frontals in ventral view; the anteriormost tip of the parasphenoid rostrum is freely extending, but slightly posterior to the tip, the anteriormost part of the dorsal process of the parasphenoid rostrum contacts the ventral surface of the posteromedial region of the nasals; the parasphenoid rostrum is distinctly separated from the choanal process of the palatine, the posterior ending of the vomers, and the septomaxillae; dorsolaterally the parabasisphenoid contacts the parietal, and the prootics posterior to it, and reaches its greatest width at the sutures between the parietal and the prootics; a foramen is located on each side in the posterolateral part of the basisphenoid portion, at the suture with the prootics; in dorsal view the parabasisphenoid is pierced by some foramina in the lateral region of the bone.

Palatomaxillary arch osteology.

The palatomaxillary arch is composed of the maxillae, ectopterygoids, palatines, and pterygoids (Fig. 8 - 10 ). The maxillae are elongate, account for about one-third of the length of the skull, and are about 5.6 times longer than high, extending from shortly behind the level of the lateral processes of the premaxilla to behind the central region of the orbit, forming most of the lower margin of the orbit laterally; the maxilla is slightly triangular in lateral view, ignoring the teeth, with the highest point at about half of its length; the maxillae are slightly arched towards the premaxilla and have an edentulous anterior pointed process; the ventral surface of the maxilla bears four tooth loci, with curved, and rear facing anterior teeth, followed posteriorly, after a small interspace, by a pair of large deeply grooved fangs, situated below the eye; the posterior end of the maxilla is approximately rectangular and without a tooth-like spur; of the cranial bones the maxilla only contacts the prefrontal on its dorsal surface at its highest point; the palatine process is short, approaches but not contacts the maxillary process of the palatine; a small, knob-like ectopterygoid process is visible, but remains slightly separated from the anterior tip of the medial process of the ectopterygoid.

The paired ectopterygoids are divining rod-shaped, deeply bifurcated anteriorly, with a longer medial process than lateral process; in dorsal view of the skull, the lateral process and the anterior half of the medial process are visible, whereas the rest of the ectopterygoid is covered by the parietal; the two anterior processes are directed anterolaterally and frame the posterior end of the maxilla laterally and medially without touching it, forming an almost closed maxilo-ectopterygoid fenestra; the ventral surface of the flattened posterior process has a facet, where it firmly contacts the dorsal surface of the anterolateral portion of the pterygoid.

The paired pterygoids are edentulous, flattened, elongate and slender, about 9.7 times longer than broad, corresponding to approximately half the length of the skull; except for the firm contact with the ectopterygoid, the pterygoid does not contact any of the other skull bones; in dorsal view of the skull, only small portions of the posterior tips are visible and not completely covered by the supratemporals, whereas the rest of the pterygoids are completely covered by the roofing skull bones; the anteromedial tip of the pterygoid dorsally overlaps only marginally the posteromedial tip of the palatine without touching it; in ventral view, the lateral border of the pterygoid is slightly curved posterolaterally; the medial borders of both pterygoids are nearly parallel to each other in the anterior third, with the smallest distance between them at their anterior tips; the medial border of the last two-thirds of the bone gradually tapers posterolaterally, resulting in the greatest distance between both pterygoids at their posterior tips; the posterior end of the pterygoid approaches medially the ventromedial process of the quadrate without touching it.

The paired palatines are elongate and slender, about 7.3 times longer than wide, when not considering the choanal and maxillary processes, and correspond to 24% of the length of the skull; their medial edge is straight, and both palatines are about parallel to each other; the ventral surface has four tooth loci; the teeth are subequal, curved, and rear facing; of the cranial bones the palatine only contacts the medioventral region of the prefrontal on the dorsal surface of its maxillary process; the anterior portion of the palatine, anterior to the tooth line is almost quadrangular and approaches the ventrolateral part of the vomer dorsally, without contacting it; dorsomedially, a long, thin choanal process rises and curves downwards in a semicircle, approaching but remaining distinctly separated from its counterpart medially; the short, about triangular maxillary process is situated on the lateral surface of the palatine at the level of the first tooth, directed anterolaterally, approaching but not contacting the palatine process of the maxilla; the posterior part of the palatine behind the tooth line is bifurcated, with a slightly shorter ventrolateral process and a slightly longer dorsomedial process, both tapering towards the posterior end, and the anterior part of the pterygoid extends into the gap between the two processes without touching them.

Suspensorium and mandible osteology.

The suspensorium is composed of the supratemporals and the quadrates. Each mandible is composed of the dentary, splenial, angular, and compound bone (Figs 10 - 11 ). The supratemporals are laminar, elongate, more than six times longer than wide, slightly curved, and slightly oblique; in dorsal view, slightly more than the anterior half of each supratemporal overlaps and firmly contacts the posterior half of the prootic and the anterolateral part of the exoccipital over well-defined facets; distinctly separated from the parietal; the posterolateral region approaches the dorsomedial aspect of the quadrate, without touching it; the posterior end does not protrude posteriorly beyond the quadrate and ends distinctly before the posterior end of the exoccipital.

The quadrates are flattened and broad dorsally, tapering dorsoventrally in lateral view, but gradually increasing in width in rear view; they are oriented oblique, from anterodorsally to posteroventrally; the posterodorsal part approaches the posterolateral region of the supratemporal medially; the medial part has a short process, which corresponds to the contact region with the columella auris, but the columella auris is not visible; the ventral part is bifurcated, with the medial branch being broader than the lateral branch and both together spanning the glenoid cavity of the retroarticular process of the mandible; the quadrate does not exceed the posterior limit of the skull roof.

The dentaries are elongate and slender, making up about 40% the length of the mandible, and are slightly curved anteromedially; the dorsal surface bears five (left dentary) or six (right dentary) tooth loci; the teeth are subequal, curved and rear facing; the lateral face is slightly convex with a mental foramen located at about the level of the fifth tooth, almost in the medial region of the dentary; at about the level of the last tooth, the dentary branches into a shorter dorsal process, which overlays the anterior part of the compound bone, and a longer lanceolate ventral process; the gap between the dorsal and ventral processes is mainly filled by the splenial, whereas the posteriormost part of the ventral process contacts the anteroventral part of the angular; the ventral process runs with its dorsal surface parallel and close along the anterior part of the medioventral region of the compound bone without touching it; in medial view, the dorsal process is bifurcated in its posterior region, distinctly behind the last tooth, with a longer dorsolateral branch and a very short ventromedial branch.

The splenials are elongate, triangular, tapered anteriorly, about 4.2 times longer than high, and represent the smallest of the mandibular bones, making up about one-fifth of the mandibular length; the anterior mylohyoid foramen is centrally positioned in the posterior part of the bone at the level of its greatest height; the posterior edge of the splenial firmly contacts the anterior region of the angular; the dorsal edge is notched in the posterior region, just before the summit of the triangle.

The angulars are elongate, triangular, tapered posteriorly, almost five times longer than high, and represent the second smallest of the mandibular bones, making up about one-fourth of the mandibular length; each angular contacts the splenial anteriorly, the compound bone laterally and dorsally, the posteriormost tip of the medial process of the dentary, and the posteromedial surface of the ventral process of the dentary; the posterior mylohyoid foramen is on the lateral surface in the anterior third of the bone.

The compound bones are elongate and slender, about 8.6 times longer than high, and represent the largest of the mandibular bones, making up about two-thirds of the length of the mandible; the prearticular and surangular crests are about similar in height, and therefore neither of them is visible in lateral or medial view; in lateral view, the compound bone tapers anteriorly, loosely fitting between the dorsal and ventral processes of the dentary; an anterodorsally oriented foramen is present in the anterior region on the lateral surface of the compound bone; the retroarticular process is moderately long, slightly medially directed, and does not surpass beyond the posterior end of the exoccipital.

Geographic distribution.

This species has been historically recorded in Argentina, Brazil, Bolivia, and Paraguay ( Nogueira et al. 2019). The record from Argentina is based on a specimen (USNM 73458) from Estancia Breyer, Patquia, La Rioja; although this specimen clearly is A. ambiniger , its locality is determined here as incorrect, as other specimens from the same collector have been corrected as being from Paraguay (see Dixon and Hendricks 1979). Nogueira et al. (2019) present 11 records of the species for Brazil. However, except for one, none of these records are based on direct examination of specimens, and only a collection acronym is given in the appendix of specimens examined (ZUFMS), referring to the Coleção Zoológica Universidade Federal do Mato Grosso do Sul. To our knowledge, there are no specimens of A. ambiniger deposited in this collection, and this is further corroborated by the curator (Diego J. Santana, personal communication). The single vouchered record of A. ambiniger from Brazil reported by Nogueira et al. (2019) is a specimen (FMNH 69934) from "Fazenda Ipanema," Varnhagem (currently Iperó municipality), São Paulo, Brazil. This specimen is reanalyzed here, and redetermined as A. dimidiata . In light of these findings, the records of Nogueira et al. (2019) should be considered as dubious, as to this moment, there are no verifiable records of A. ambiniger from Brazil. Nogueira et al. (2019) also report a specimen (USNM 108809) from “Bolivia,” with coordinates from Buena Vista, Bolivia. However, based on the collection data, this specimen is redetermined here as being from Trinidad, Departamento Central, Paraguay. The single vouchered record from Bolivia is reported by Lema et al. (2005), a specimen (LACM 37647) from Chuquisaca, El Salvador, Bolivia; this record is herein examined by us and redetermined as Apostolepis multicincta . From Paraguay, A. ambiniger is recorded for the departments of Cordillera, Central, and Presidente Hayes. In light of this evidence, we restrict the occurrence of A. ambiniger to Paraguay (Fig. 12 ; Table 1 in the Supplementary Table).

Figures

Figure 1. Dorsal and ventral views of Apostolepis ambiniger (Peters, 1868) holotype (ZMB 6450). Scale bar = 10 mm. Photo by Frank Tillack.

Figure 2. Head view of Apostolepis ambiniger holotype (ZMB 6450). Scale bar = 10 mm. Photo by Frank Tillack.

Figure 3. Dorsal view of Apostolepis ambiniger specimens (Top: ZMB 28279; Middle and Down: ZMB 32144). Scale bar = 10 mm. Photo by Frank Tillack.

Figure 4. Color pattern of Apostolepis ambiniger in life. Illustration by Arthur Tiutenko.

Figure 5. Specimen of Apostolepis ambiniger in life (unvouchered), from San Lorenzo, Departamento Central, Paraguay. Photo by Nicolas Martinez.

Figure 6. Hemipenis of Apostolepis ambiniger (MHNP 3493) on sulcate (left) and asulcate (right) sides. Illustration by Arthur Tiutenko.

Figure 7. Sexual dimorphism in mensural (A) and meristic (B, C) characters of Apostolepis ambiniger. We used interpolation to calculate percentiles of the box plots. Open circles in C represent near outliers and an asterisk represents a far outlier.

Figure 8. Micro-CT images of the skull without mandibles of the holotype of Apostolepis ambiniger (ZMB 6450) in A) dorsal, B) lateral, and C) ventral views; AS (ascending process of premaxilla); BO (basioccipital); BS (basisphenoid); CHP (choanal process of palatine); CPS (conchal process of septomaxilla); ECP (ectopterygoid); EXO (exoccipital); F (frontal); MP (maxillary process of palatine); MX (maxilla); NA (nasal); P (parietal); PAL (palatine); PFR (prefrontal); PMX (premaxilla); PRO (prootic); PSP (parasphenoid rostrum); PT (pterygoid); Q (quadrate); SMX (septomaxilla); SO (supraoccipital); ST (supratemporal); V (vomer).

Figure 10. Micro-CT images of the skull of the holotype of Apostolepis ambiniger (ZMB 6450) in A) anterior, and B) posterior views; AS (ascending process of premaxilla); BO (basioccipital); BS (basisphenoid); CP (compound bone); D (dentary); ECP (ectopterygoid); EXO (exoccipital); F (frontal); MX (maxilla); NA (nasal); OC (occipital condyle); P (parietal); PFR (prefrontal); PMX (premaxilla); PRO (prootic); PT (pterygoid); Q (quadrate); RP (retroarticular process of compound bone); SMX (septomaxilla); SO (supraoccipital); ST (supratemporal); V (vomer).

Figure 11. Micro-CT images of the mandible of the holotype of Apostolepis ambiniger (ZMB 6450) in (A) lateral, (B) medial, (C) dorsal, and (D) ventral views; AN (angular); CP (compound bone); D (dentary); DPD (dorsal process of dentary); PCR (prearticular crest of compound bone); RP (retroarticular process of compound bone); SAC (surangular crest of compound bone); SP (splenial); VPD (ventral process of dentary).

Figure 12. Geographic distribution of A. ambiniger. Green circles = verified point records of A. ambiniger; red circles = wrong (or from missing specimens) point records previously attributed to A. ambiniger (see Table 1 in the Supplementary Table); Polygon = extension of occurrence (7,626.941 km ²).