Rodingites, Korn & Weyer, 2023
publication ID |
https://doi.org/ 10.5852/ejt.2023.882.2177 |
publication LSID |
lsid:zoobank.org:pub:67C909E4-C700-4F8D-B8CE-5FD9B2C5D549 |
DOI |
https://doi.org/10.5281/zenodo.8187599 |
persistent identifier |
https://treatment.plazi.org/id/37306BE3-F3E7-4834-BB63-B092BAA43545 |
taxon LSID |
lsid:zoobank.org:act:37306BE3-F3E7-4834-BB63-B092BAA43545 |
treatment provided by |
Felipe |
scientific name |
Rodingites |
status |
gen. nov. |
Genus Rodingites gen. nov.
urn:lsid:zoobank.org:act:37306BE3-F3E7-4834-BB63-B092BAA43545
Type species
Pseudarietites planissimus Vöhringer, 1960: 165 .
Genus diagnosis
Genus of the subfamily Pseudarietitinae with a compressed whorl profile with acute venter and an attached ventral keel. Sculpture with simple ribs or folds.
Etymology
Named after the town of Oberrödinghausen.
Genus composition
Pseudarietites planissimus Vöhringer, 1960 ; Protocanites carinatus Vöhringer, 1960 .
Remarks
The new genus is separated from Pseudarietites because of its widely umbilicate conch and the compressed whorl cross section with acute venter that bears an attached keel.
Rodingites planissimus ( Vöhringer, 1960) gen. et comb. nov.
Fig. 115A View Fig ; Table 110
Pseudarietites planissimus Vöhringer, 1960: 165 , pl. 6 fig. 13, text-fig. 42.
Pseudarietites planissimus – Weyer 1965: 449, pl. 8 fig. 3. — Korn 1994: 78, text-figs 70j, 72d; 2006: text-fig. 4g. — Sprey 2002, pl. 4 fig. 4.
Diagnosis
Species of Rodingites gen. nov. with a conch reaching 50 mm diameter. Conch at 40 mm dm extremely discoidal, evolute (ww/dm ~0.17; uw/dm ~0.50). Whorl profile at 40 mm dm weakly depressed (ww/wh ~0.65); coiling rate low (WER ~1.70). Venter acute with keel, umbilical margin rounded. Sculpture on the flank 50 sharp ribs with concave course.
Material examined
Holotype
GERMANY • Rhenish Mountains, Oberrödinghausen, railway cutting; Hangenberg Limestone, bed 3a; Vöhringer Coll.; illustrated by Vöhringer (1960: pl. 6 fig. 13), Korn (1994: text-fig. 70j), Sprey (2002: pl. 4 fig. 4) and Korn (2006: text-fig. 4g); re-illustrated here in Fig. 115A View Fig ; GPIT-PV-63962.
Description
Holotype GPIT-PV-63962 is a rather complete specimen with 43 mm conch diameter and allows the study of the last two and a half whorls ( Fig. 115A View Fig ). It is a very evolute, extremely discoidal conch (ww/ dm = 0.17; uw/dm = 0.53) with a galeate whorl profile. The venter is characterised by an attached keel. The last one and a half whorls bear rounded ribs, which start on the inner half of the flank, but only become very distinct in the ventrolateral area. These ribs start at a conch diameter of about 16 mm as ventrolateral nodes. The last half whorl possesses 25 of these ribs, the spacing of which becomes increasingly smaller. They have a concave course across the flank and are truncated by the ventral keel.
Remarks
Because of the extremely discoidal conch shape, the very wide umbilicus and the dense ribbing, Rodingites planissimus gen. et comb. nov. cannot be confused with any other ammonoid species from the early Tournaisian. The most similar species is Rodingites carinatus gen. et comb. nov., but it possesses no ribs, but only flat radial folds.
Rodingites carinatus ( Vöhringer, 1960) gen. et comb. nov.
Fig. 115B View Fig ; Table 111
Protocanites carinatus Vöhringer, 1960: 170 , pl. 6 fig. 7, text-figs 47, 50.
Protocanites (Eocanites) carinatus – Weyer 1965: 458, pl. 8 figs 6–7.
Pseudarietites carinatus – Korn 1994: 77, text-figs 70f, 72e.
Diagnosis
Species of Rodingites gen. nov. with a conch reaching 30 mm diameter. Conch at 25 mm dm extremely discoidal, subevolute (ww/dm ~0.22; uw/dm ~0.44). Whorl profile at 25 mm dm weakly depressed (ww/ wh ~0.70); coiling rate low (WER ~1.70). Venter acute with raised keel, umbilical margin rounded. Sculpture with very shallow, rounded folds with nearly linear course.
Material examined
Holotype
GERMANY • Rhenish Mountains, Oberrödinghausen, railway cutting; Hangenberg Limestone, bed 3b; Vöhringer Coll.; illustrated by Vöhringer (1960: pl. 6 fig. 7) and Korn (1994: text-fig. 70f); re-illustrated here in Fig. 115B View Fig ; GPIT-PV-64011.
Description
Holotype GPIT-PV-64011 is a specimen with 24 mm diameter embedded in a piece of limestone. The conch shows the last five whorls ( Fig. 115B View Fig ). The outer appearance is serpenticonic with a largely smooth shell surface. The conch is very slender and evolute (ww/dm = 0.22; uw/dm = 0.45) with a galeate whorl profile, which tapers sharply at the venter and has an attached, crest-like shell keel. On the last whorl, radial concave folds appear on the flank; they are most evident on the outer half of the flank. Some spiral lines are formed on the middle of the flank.
Remarks
Rodingites carinatus gen. et comb. nov. has the most prominent keel of all ammonoid species known so far from the early Tournaisian. The species is distinguished from Rodingites planissimus gen. et comb. nov. by the absence of the coarse ribs, which in Rodingites carinatus are only developed as very low folds.
No known copyright restrictions apply. See Agosti, D., Egloff, W., 2009. Taxonomic information exchange and copyright: the Plazi approach. BMC Research Notes 2009, 2:53 for further explanation.
Kingdom |
|
Phylum |
|
Class |
|
Order |
|
Family |
Rodingites
Korn, Dieter & Weyer, Dieter 2023 |
Pseudarietites carinatus
Korn D. 1994: 77 |
Pseudarietites planissimus
Sprey A. M. 2002: 187 |
Weyer D. 1965: 449 |
Protocanites (Eocanites) carinatus
Weyer D. 1965: 458 |
Pseudarietites planissimus Vöhringer, 1960: 165
Vohringer E. 1960: 165 |
Pseudarietites planissimus Vöhringer, 1960: 165
Vohringer E. 1960: 165 |
Protocanites carinatus Vöhringer, 1960: 170
Vohringer E. 1960: 170 |