Tortopus harrisi Traver

Molineri, Carlos, Siegloch, Ana E. & Righi-Cavallaro, Karina O., 2010, The nymph of Tortopus harrisi Traver (Ephemeroptera: Polymitarcyidae), Zootaxa 2436, pp. 65-68 : 65-68

publication ID

https://doi.org/ 10.5281/zenodo.194817

DOI

https://doi.org/10.5281/zenodo.6209318

persistent identifier

https://treatment.plazi.org/id/0275A87F-E831-A36F-F1C7-FA80FD6C91FE

treatment provided by

Plazi

scientific name

Tortopus harrisi Traver
status

 

Tortopus harrisi Traver View in CoL

T. harrisi Traver 1950: 604 View in CoL ; Domínguez 1985: 69; Domínguez et al. 2006: 585.

Material examined: holotype male imago ( CUIC slides No. 3031) from: Brazil, Mato Grosso, 23-XII-19, R.G. Harris col. New material: 1 nymph ( IML) from Brazil, Mato Grosso do Sul, Dois Irmãos river, Dois Irmãos do Buriti, 20°31'53"S, 55°34'37"W, drag, 15-IX-2006, D. S. Barbosa & D. Fassini; and 1 nymph ( MZSP) same data except river Miranda, Jardim, 21°28'56"S, 56°07'13"W), surber sampler, 10-I-2006.

Mature nymph. Length. Male: body, 12.0–13.0 mm; cerci, 10.0–11.0 mm; caudal filament, 4.0 mm. Head with two large submedian oval tufts of short setae anterior to lateral ocelli (t in Fig. 1 View FIGURES 1 – 5 ); frontal ridge relatively straight in dorsal view ( Fig. 1 View FIGURES 1 – 5 ); fronto-clipeal region straight not surpassing mandibular tusks ventrally (arrows in Figs. 1–2 View FIGURES 1 – 5 ); mandibular tusks straight ( Figs. 1–2 View FIGURES 1 – 5 ), with very few setae dorsally, mainly restricted to a subdistal group of seven rigid setae ( Figs. 6–7 View FIGURES 6 – 12 ); inner margin with two large tubercles (subdistal and submedian, Figs. 6–7 View FIGURES 6 – 12 ); maxillae with a relatively large ventral gill (g in Fig. 8 View FIGURES 6 – 12 ). Thorax. Pronotum with narrow anterior ring (0.25–0.26 of total length of pronotum); antero-lateral corners acutely projected. Legs. Foreleg with tibia-tarsus strongly flattened with a small dorso-distal projection (0.35– 0.40 of total length of claw) ( Fig. 12 View FIGURES 6 – 12 ), ventral surface with two long U-shaped rows of filtering setae; fore femur with anterobasal short U-shaped row of filtering setae and an immediately posterior small group of simple setae. Middle leg with long setae on anterior and posterior (functionally ventral and dorsal, respectively) margins of femur, anterior margin of tibia and tarsus; apical third of tibia and tarsus completely covered with strong setae, apex of tibia with a brush of thick setae ventrally. Hind leg with short strong setae on posterior margin, and transverse subdistal row of short setae on dorsal surface; hind tibia and tarsus with long setae on posterior margin, anterior margin covered with short and strong setae. All tarsal claws slender and curved, without denticles. Abdomen. Gill I single, small and elongated ( Fig. 9 View FIGURES 6 – 12 ), remaining gills well developed and double. Terga II–IX with medio-longitudinal row of setae; abdominal sterna with lateral margins covered with setae, more numerous on sterna V–IX, sterna V–VI also with row of setae on posterior margin. Cerci with rows of setae at each joining, mainly on basal fourth; terminal filament much thinner and with whorls of setae almost on its entire length. Genital rudiments ( Figs. 10–11 View FIGURES 6 – 12 ): peneal buds U-shaped, forceps bisegmented basal segment with large ventral knob (k in Fig. 11 View FIGURES 6 – 12 ).

The association between the nymphal and adult stages was possible because both nymphs are pharate male subimagos ready to molt. Thus genital morphology could be studied and compared with the holotype male, sharing the following features: parastyli very short and pointed, large ventral knob on forceps base, and penes basally fused. Also the body size and general coloration coincide in both nymphs and adult. Only two species of the genus present very short and pointed parastyli, T. harrisi and T. bellus , but they can be easily separated because the last species is larger and much darker than the former (Molineri submitted). Furthermore, T. bellus is only known from Costa Rica while all the material attributed to T. harrisi is restricted to the Paraguay river basin. The nymph of Tortopus harrisi differs from the other three species known from this stage ( T. puella , T. obscuripennis and T. sarae ) in many important features, the most remarkable being the paired tubercles on the mandibular tusks ( Figs. 1 View FIGURES 1 – 5 , 6–7 View FIGURES 6 – 12 ) but also in other characters treated below.

Campsurinae nymphs show tufts or patches of short thick setae tightly grouped on dorsum of head, the largest of these tufts being located anteromedially to lateral ocelli. These patches are relatively small and elongated in T. puella , T. obscuripennis and T. sarae (t in Fig. 3 View FIGURES 1 – 5 ) but larger and subovate in T. harrisi ( Fig. 1 View FIGURES 1 – 5 ). The fronto-clypeal area, anterior to the prominent frontal ridge, is somewhat concave and very developed in the species previously described, the apex of the clypeus being directed ventrally between the mandibular tusks ( Figs. 4–5 View FIGURES 1 – 5 ). On the contrary, in T. harrisi the frontoclypeal area is less developed and straight ( Figs. 1–2 View FIGURES 1 – 5 ), the apex of clypeus being distinctly marked and ending dorsally to the tusks ( Fig. 2 View FIGURES 1 – 5 ).

Mandibles not only differ in the number of median tubercles, one subdistal ( Fig. 3 View FIGURES 1 – 5 ) in the triplet T. puella , T. obscuripennis and T. sarae but two (subdistal and submedian, Fig. 1 View FIGURES 1 – 5 ) in T. harrisi , but also on the number and arrangement of spines and setae. The distinct ridge covered with strong short spines along the outer (dorso-lateral) margin of the tusks ( Fig. 3 View FIGURES 1 – 5 ) is only present in T. puella , T. obscuripennis and T. sarae (the tusks of T. harrisi are smooth in this area, Figs. 1 View FIGURES 1 – 5 , 6–7 View FIGURES 6 – 12 ). Finally, the previously known nymphs present a large number of setae directed medially on inner margin of the tusks, but they are almost absent in T. harrisi . The legs are very similar in all four species, not only in the shape but also in setation. The only difference is in fore tibia-tarsus, much more projected distally in T. puella , T. obscuripennis and T. sarae (the projection being 2/3 of the total length of the claw) than in T. harrisi (only 2/5 of that length, Fig. 12 View FIGURES 6 – 12 ).

The following characters, of generic importance ( Molineri 2008), are shared by all four species of Tortopus known as nymphs: the shape and location of the subapical tubercle on the mandibular tusk, the large finger-like gill on base of maxilla ( Fig. 8 View FIGURES 6 – 12 ), and the unilamellate gill on abdominal segment I ( Fig. 9 View FIGURES 6 – 12 ).

The differences in the setation of the tusks and the form of the fronto-clypeal area are strong indicators of differences in habitat preference in T. harrisi . The nymphs of T. puella , T. obscuripennis and T. sarae inhabit U-shaped tunnels in hard clay river banks, and they use the dorsal surface of the tusks and the fronto-clypeal region to push the burrowed sediment out of their tunnels ( Molineri 2008). Tortopus harrisi nymphs were collected with a drag and a surber on sandy substrate, and as they lack setae directed medially on the inner margin of the tusks and they show poorly developed fronto-clypeal region, it is probable that they do not burrow in clay substrate as the other species. Nevertheless all the biological aspects of this species remain unknown.

CUIC

Cornell University Insect Collection

IML

Instituto Miguel Lillo

MZSP

Sao Paulo, Museu de Zoologia da Universidade de Sao Paulo

Kingdom

Animalia

Phylum

Arthropoda

Class

Insecta

Order

Ephemeroptera

Family

Polymitarcyidae

Genus

Tortopus

Loc

Tortopus harrisi Traver

Molineri, Carlos, Siegloch, Ana E. & Righi-Cavallaro, Karina O. 2010
2010
Loc

T. harrisi

Dominguez 2006: 585
Dominguez 1985: 69
Traver 1950: 604
1950
GBIF Dataset (for parent article) Darwin Core Archive (for parent article) View in SIBiLS Plain XML RDF